Keycaps Epoxy Resin Casting Molds Set for Mechanical Gaming Keyboard Polymer Clay Crafts 6 Silicone Trays with Key Puller

Brand: FUNSHOWCASE

Color: Keycap Molds 6-in-set

Features:

• 3D key caps resin silicone molds with 6 counts 30 cavities. Cat paw and blank keycap molds to make tab, caps lock, space key, ctrl, backspace, shift, enter, function, number, letter. For handmade resin key caps, polymer clay craft, minature inlay art and more.
• Key cap molds and cross-shaped base molds. Suitable for "+" shaped mechanical keyboard. Comes with a keycap puller, convenient to pull key caps. Gift for boys, gamer, programmers and more.
• Mainly use with modelling clay (air clay, paper clay, resin clay, polyclay, polymer clay, salt clay, metal clay, liquid clay etc.), resin(epoxy resin, rethane resin, uv resin), concrete, cement, gypsum, plaster, hot glue, soap, candle, wax, mix media and more
• Transparent soft mold, you can check the buttom when process project. Easy to demold, gloss finish
• Food Grade. Food and Non Food material should use separately. Wash and boil before use, especially for food. Easy to use mold very flexible and easy to clean, can be used in oven, dishwasher, refrigerator etc. Can be used within the temperature between -40~220 centigrade / -40~428 fahrenheit
• For craft, you may draw letter with acrylic print

model number: 3406-3412

Part Number: 3406-3412

Details: Dimension (approximate): Cat claw:7x5.4cm Tab, Q row: 6.9x4.5 Caps lock, A row: 6.8x4.5cm Ctrl, Z row: 7x4.5cm Backspace, function, number row: 7x4.5cm Space key, shift, enter: 14.6x4.5cm Mold color: clear Finish: gloss (may require polish/glaze if need a shiniest/most glossy look) Suffer temperature: -40 to 230 centigrade/ -40 to 446 fahrenheit Can be used with dishwasher/oven/refrigerator Food grade, no BPA/PVC/phthalate Wash and boil before use, especially for food More Tips to use with Epoxy Resin: 1) Poured in silicone molds in layers, allowing air bubbles completely escape; 2) To expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up, for example, heat the oven to 80°C, turn off, ventilate it a little and put mold, filled with resin in the oven. 3) Follow resin instruction for the time need to cure, measure and mix resin properly. It does not mean it has been cured if it is hard. 4) Do not use water-base ink for resin casting. 5) After baking clay / resin in complex or deep molds release the finished product under running water with soap. 6) Put in refrigerator a while/ soak in hot water a while/ release with baby oil if it is hard to release.

Package Dimensions: 7.8 x 7.7 x 1.1 inches